Dynacraft Prophet CB Iron - Clubhead - All Questions
What is the COR for these heads?
Question by: Bill on Mar 20, 2016, 9:01 AM
Bill,
The USGA only wants to manufacturers to say the club either conforms to the Rules of Golf or does not conform to the Rules of Golf. These are indeed higher COR than our standard stainless steel irons, but will vary depending upon the loft of the club.
The USGA only wants to manufacturers to say the club either conforms to the Rules of Golf or does not conform to the Rules of Golf. These are indeed higher COR than our standard stainless steel irons, but will vary depending upon the loft of the club.
Answer by: Richard Lin on Mar 21, 2016, 9:03 AM
I have a 33.5" shaft. What finished club length will this give me on a gap wedge
Question by: Robert Woodrick on May 10, 2016, 5:56 PM
Robert,
You will gain 1.0" for the head's bottom of the bore to ground line measurement plus whatever extra length the grip cap provides depending on the model.
You will gain 1.0" for the head's bottom of the bore to ground line measurement plus whatever extra length the grip cap provides depending on the model.
Answer by: Richard Lin on May 11, 2016, 5:05 PM
Is the Dynacraft Prophet CB still the hottest face/fastest ball speed iron head that you sell? Or have any of your newer iron heads surpassed it?
Question by: Ed in NM on Jun 25, 2016, 6:05 PM
Ed,
At this time the Dynacraft Prophet CB is our highest performance iron in terms of distance.
At this time the Dynacraft Prophet CB is our highest performance iron in terms of distance.
Answer by: Richard Lin on Jun 26, 2016, 6:06 PM
I have really enjoyed these clubs. The wedges have a great feel to them. I have also used the older CNC version in a wedge. I would really to get a CNC milled version of the wedges for this set. Is that totally out of the question?
I have paired these wedge heads with Tour concept "W" flex shafts and am very pleased.
I have paired these wedge heads with Tour concept "W" flex shafts and am very pleased.
Question by: Bob Woodrick on Oct 14, 2016, 7:03 AM
Bob,
The only thing you might have to worry about is distance gapping between the cavity back irons and older wedges.
The only thing you might have to worry about is distance gapping between the cavity back irons and older wedges.
Answer by: Richard Lin on Oct 15, 2016, 7:10 AM
What is the bore depth on the hosel?
Question by: Joseph Lin on Nov 23, 2016, 6:58 AM
Joseph,
The insertion depth of these irons are 1.13" or 29mm.
The insertion depth of these irons are 1.13" or 29mm.
Answer by: Richard Lin on Nov 24, 2016, 6:11 AM
what is a good shaft for these heads?
Question by: BRUCE LOPER on Dec 9, 2016, 8:50 AM
Bruce,
We designed these to go with the lighter weight / higher launching shafts, but what is best fit is dependent upon your strength and tempo as well as what other shafts you have used that have worked well with your swing. Unfortunately there is not enough information to answer your question.
We designed these to go with the lighter weight / higher launching shafts, but what is best fit is dependent upon your strength and tempo as well as what other shafts you have used that have worked well with your swing. Unfortunately there is not enough information to answer your question.
Answer by: Richard Lin on Dec 10, 2016, 8:12 AM
I am looking for more forgiveness than I get from my dynacraft Caymans with a filament wound graphite shaft. I am 62 and while I don't hit the ball as far as I did 10 years ago, i currently hit the 7 iron about 148 with a regular shaft. what shaft would you recommend for the Prophet cb's
Question by: bruce loper on Dec 10, 2016, 8:38 AM
Bruce,
Unfortunately there is too little information provided to tell you what shaft(s) to use. I would need to know what shaft you have as well as what kind of problems you are experiencing (general inconsistency, hitting the ball to the right, hitting the ball too low, etc.). Plus, if there have been any clubs you have hit lately you hit well. If so, what was the shaft / flex? Answers to those questions will help make a reasonable recommendation.
Unfortunately there is too little information provided to tell you what shaft(s) to use. I would need to know what shaft you have as well as what kind of problems you are experiencing (general inconsistency, hitting the ball to the right, hitting the ball too low, etc.). Plus, if there have been any clubs you have hit lately you hit well. If so, what was the shaft / flex? Answers to those questions will help make a reasonable recommendation.
Answer by: Richard Lin on Dec 11, 2016, 8:12 AM
is the standard club length you mention for steel or graphite? thanks.
Question by: andy hilbun on Feb 15, 2017, 10:20 AM
Andy,
On the irons and wedges it is steel and with drivers, fairways and hybrids it is graphite.
On the irons and wedges it is steel and with drivers, fairways and hybrids it is graphite.
Answer by: Richard Lin on Feb 16, 2017, 10:02 AM
Can these club head be bent without being assemble?
Question by: Louis on Apr 3, 2017, 9:14 AM
Louis,
Sorry no. We have had difficult bending these to the point we discontinued offering the service on these heads.
Sorry no. We have had difficult bending these to the point we discontinued offering the service on these heads.
Answer by: Richard Lin on Apr 4, 2017, 9:04 AM
What are the dimensions for the 5- iron, the blade length, sole width, toe height and hosel length?
Question by: Louis on Apr 3, 2017, 4:19 PM
Louis,
Blade length 80mm, sole width 23mm, toe height 55mm and hosel length 60mm.
Blade length 80mm, sole width 23mm, toe height 55mm and hosel length 60mm.
Answer by: Richard Lin on Apr 4, 2017, 4:04 PM
-
![Muscle back of the Dynacraft Driving iron]()
Dynacraft Driving Iron - ClubheadStarting at $19.99
-
![Apollo Acculite 95 Steel]()
Apollo Acculite 95 Steel Iron Golf ShaftsStarting at $10.00
